The length and thickness are close to exactly the same as the stock NiMH pack, the only concern is the width being about 5mm bigger than stock.
I know for sure though that the Etec 210maH batts are a direct fit, unfortunately I can't find them anywhere.
__________________
M18 w/Motek 150 Chassis
- Xray Comp Ball Diff front, Alum Ball Diff rear
- GPM Shocks and rear Drive Shafts
- Mamba 25 ESC w/USB Link (v2.18)
- Mamba 6800Kv Motor (17t/42t pinion/spur)
- Futaba S3102 Servo w/Xray Servo Saver
- Spektrum DX3 Tx w/SR3000 Rx
- Xray Hard Foams front, Med Foams rear
- 2x6cell 1100maH NiMH
- 1x2s 1100maH LiPo
- 1x3s 1100maH LiPo
Losi Micro-T
- Full River 250mah Lipos on the way
Duratax ICE Charger w/temp probe and Backlight mod
|