1) make sure you file the last battery slot on the chassis right. get it so that the cell sits low, like the diagram on step a-01.
2) use the loctite
3) pre-thread the bulkheads
4) the upper decks may need to have the set-pin holes enlarged to fit flush, it'll be a tight fit.
5) on bag b, step b-04.. make sure to pre-thread the diff t-nut. it's the item next to the #2 in the digram
5) take your time building the lcd's / shocks.
6)
battery setting
7) look both ways before you cross the street