Quote:
Originally Posted by hockeypux19
Only if you plan to use the stock esc/reciever combo wich reqiures a four wire connection.
|
Not.
One option with the HS-55 is to replace the top two gears of the 55 with the stock gears from the Micro-T, what this does is allow you to use the Micro-T feed horn/servo saver without further modification.
The alternatives are to either scrap the servo saver and make your own feed horn, or to file down the connecting end of the servo to fit into the hexagon shaped slot of the Micro-T feed horn/servo saver piece.
If for some unknown reason you wished to use the HS-55 with the stock electronics as hockeypux19 seems to be refering to you would also have to remove the 55’s internal circuit board and wire the motor and potentiometer directly too the Micro-T circuit board just like stock 5 wire servo is, in adition to either replace or modify the gears, or make your own feedhorn.