I dont think there is a kit out yet for the mini t that comes with a motor plate. I think you can achieve the results you are looking for, for far less than $75. I think a speed 300 in a mini t is a fairly simple mod. Read the mini t forum for this info. If you cant get the screw out, you can try drilling it out or just get a stock plate I guess. Then go with a graupner speed 300 or you could get a tuned big block from several places. K3 or Rabid. Read the forums for these as well. Anyway, good luck and have fun.
__________________
Micro RS4- ARM Pan Chassis, CF Upper Deck, Ratzas Rear With VCS Shock, Futaba mc230cr, Futaba S3003 (hg81mg died), KAN 7 Cell Pack (Custom Config.) HPI Rear Ball Diff, HPI Front One Way, GH Alum Knucks, HPI Alloy Dogbones, Allum Bulkhead, Allum Upper Bulkhead, Allum Motor Pod, Graupner Speed 400 4.8v Race, 15t Pinion, M3 Body
|