04-29-2005, 10:43 AM
|
Micro Master
|
|
Join Date: Mar 2005
Posts: 70
|
|
glitching on xray
ok, so i took out the chunky lrp esc and i thought it wouldnt glitch anymore, someone told me to move the wires away from the antenna, so i tried to, but it still glitches, please help!
http://img.photobucket.com/albums/v7...xrayglitch.jpg
|
04-29-2005, 01:30 PM
|
|
Registered User
|
|
Join Date: Feb 2004
Location: MI
Posts: 390
|
|
What motor are you runnin? Also try twisting the motor leads a few times before you connect them to the esc.
|
04-29-2005, 04:24 PM
|
|
.::.SerapH.::.
|
|
Join Date: Aug 2003
Posts: 943
|
|
Make sure that:
1. All your wires and in good working order with no nicks or cuts.
2. Your antenna is routed properly, away from noise generating sources and NOT touching the CF chassis.
3. Your motor isn't overly worn
4. There are no metal to metal contacts that rub on each other.
Good luck!
I would say #2 might be your biggest prob.
__________________
The beginning is the most important part of the work.
- Plato
... ah, but finishing what I have started... therein lies my probl...
-Me
|
04-29-2005, 04:27 PM
|
|
Micro Novice
|
|
Join Date: Jul 2003
Posts: 12
|
|
If you can, try swapping the crystals. I had a damaged crystal that acted funny.
Steve
|
04-29-2005, 09:37 PM
|
|
Super Moderator
|
|
Join Date: Jun 2004
Location: virginia beach
Posts: 10,128
|
|
Well if you can afford it go DSM, just joking man.........check your motor to see if there's three caps on there, if not add....do as fringo stated by twisting your motor wires and make sure your batt leads and motor leads are at least 2mm away from your antenna.
__________________
Xray M18
MRS4-1
540 MRS4
Spektrumized
|
04-29-2005, 11:06 PM
|
|
Micro racer
|
|
Join Date: Dec 2002
Location: NH
Posts: 1,097
|
|
I know this sounds kind of stupid but it has happend to me many times. If the antenna wire has been damaged AT ALL then thats what is causing it. Also if the antenna wire has been replaced with a shorter or longer wire, or the stock antenna wire has been shortend at all than that will do it.
|
04-30-2005, 12:09 PM
|
|
.::.SerapH.::.
|
|
Join Date: Aug 2003
Posts: 943
|
|
Yes... check the crystal... They're fragile. Also, make sure you don't have any dirt or debris in the Rx case. That can lead to glitching. Also check for voodoo curses, sunspots, celestial body alignment, and your chakra points. Good luck!
__________________
The beginning is the most important part of the work.
- Plato
... ah, but finishing what I have started... therein lies my probl...
-Me
|
04-30-2005, 12:15 PM
|
|
Super Moderator
|
|
Join Date: Jun 2004
Location: virginia beach
Posts: 10,128
|
|
Fringo's Da man....
__________________
Xray M18
MRS4-1
540 MRS4
Spektrumized
|
04-30-2005, 05:38 PM
|
|
Super Moderator
|
|
Join Date: Jun 2004
Location: virginia beach
Posts: 10,128
|
|
you might want to make the switch to FM....With AM it is easy to distorte the signal with the surroundings your in....which can cause glitching.
__________________
Xray M18
MRS4-1
540 MRS4
Spektrumized
|
04-30-2005, 06:44 PM
|
Micro Master
|
|
Join Date: Mar 2005
Posts: 70
|
|
do i have to buy a whole new radio and reciever or can i just change the crystals?
|
04-30-2005, 08:13 PM
|
|
Micro Novice
|
|
Join Date: Mar 2004
Location: The Open Road
Posts: 48
|
|
antenna wire
Try moving the antenna further (forward, in front of the rx) away from the motor and the motor wires. Turn the rx so the antenna wire is also facing forward away from the motor. Maybe move it all forward.
Does it glitch when you're on and off the throttle, or just when you're on the throttle?
It could be worn brushes or blown caps, try a different motor.
Why is the title "glitching on xray"?
________
host and design
Last edited by Ken Mifune; 01-21-2011 at 04:08 PM.
|
04-30-2005, 09:28 PM
|
Micro Master
|
|
Join Date: Mar 2005
Posts: 70
|
|
because i had glitching on my xray at first
|
04-30-2005, 09:29 PM
|
|
Registered User
|
|
Join Date: Jan 2004
Location: Toronto
Posts: 529
|
|
is your battery pack homemade? poorly made battery packs can make a lot of electrical noise and cause glitching
also, i would take apart the receiver to make sure theres no sand or dirt inside, and to make sure the antenna wire is soldered on securely
|
04-30-2005, 10:30 PM
|
Micro Master
|
|
Join Date: Mar 2005
Posts: 70
|
|
what kind of caps should i get? (i think thats the problem cuz my motor doesnt have any , sorry guys) thats funny though... i installed the big block on the micro street force (w/ futaba am rx and tx) and it doesnt have any problems....
Last edited by jmoney48; 04-30-2005 at 11:38 PM.
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 03:07 AM.
|
|