YourMicro.com - HPI Micro RS4, Losi Mini-T, XRay M18, Forums, News, Pictures, Parts, and Shop
Forums, M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
M18 Hop-Ups, M18 Parts, Mini-LST Hop-Ups, Mini-LST Parts, Kyosho, Atomic, 3Racing, Country Alloy Works, Castle Creations, Trinity, Intellect, United RC, Battery Packs, 2/3A
  #1  
Old 01-15-2005, 06:43 PM
Mondo's Avatar
Mondo Mondo is offline
Micrologist/Moderator
 
Join Date: Jun 2002
Location: Bristol, England
Posts: 2,813
Mondo's MQ

man, this MQ Forum needs some livening up..

Here's pics of my Mini-Quake. It's not the Duratrax RTR version, it's the "Anderson MRX4" non-RTR that comes with a standard 380 motor and el-cheapo 600mAh NiMh pack.

So far I fitted a Futaba S3002 MG hi-torque steering servo.
It has a Hitec HFS03MM 40 MHz FM RX fitted. I'm awaiting my Futaba MC230R ESC to come from the U.S. and I got some URC X61 7.2V matched packs for it too.
Lastly it has a ProLine Crowd Pleazer bodyshell that looks a lot better than the canary yellow and Rastafarian green standard shell.
Attached Images
File Type: jpg mini-quake cp (16).jpg (610.7 KB, 152 views)
__________________
Second place is the first loser
Reply With Quote
  #2  
Old 01-15-2005, 06:50 PM
Mondo's Avatar
Mondo Mondo is offline
Micrologist/Moderator
 
Join Date: Jun 2002
Location: Bristol, England
Posts: 2,813
Mondo's MQ

I was contemplating a Mamba25 Brushless system for this little beast, but decided to wait for the URC Krystal-4 tuned 380 motor instead. Hopefully Jon will be releasing that soon.

I think some alloy dogbones are needed on the MQs, but I haven't run this critter yet as I'm awaiting an ESC.

generally it's a great little truck and worth the money.
Attached Images
File Type: jpg mini-quake cp (13).jpg (611.1 KB, 99 views)
__________________
Second place is the first loser
Reply With Quote
  #3  
Old 01-15-2005, 07:23 PM
Gale Force's Avatar
Gale Force Gale Force is offline
Micro Master
 
Join Date: Feb 2002
Location: The Great White North
Posts: 147
I'm thinking about picking one of these up but nobody around here are selling them.

Yours looks very good and ready to race with that body!
__________________
Jay

IPD Racing 140 Limited
Penguin p3500 LM
Xray m-18
Losi Mini-T
Tamiya TLT-1
Reply With Quote
  #4  
Old 01-15-2005, 09:16 PM
BLiND's Avatar
BLiND BLiND is offline
Registered User
 
Join Date: Jul 2002
Location: California
Posts: 7,543
Send a message via ICQ to BLiND
looks great mondo!
__________________
Blind Batteries

-Intellect 1400mAH packs starting at $16!
Reply With Quote
  #5  
Old 01-16-2005, 04:05 PM
Mondo's Avatar
Mondo Mondo is offline
Micrologist/Moderator
 
Join Date: Jun 2002
Location: Bristol, England
Posts: 2,813
Quote:
Originally posted by BLiND
looks great mondo!
Thanks Kev, can't wait to run it. The guys who run BeatYourTruck reckon it's the best Micro scale truck they've ever gotten their hands on.
__________________
Second place is the first loser
Reply With Quote
  #6  
Old 01-22-2005, 02:58 PM
Mondo's Avatar
Mondo Mondo is offline
Micrologist/Moderator
 
Join Date: Jun 2002
Location: Bristol, England
Posts: 2,813
Finished & running

Ha! Finished at last:

I fitted a Graupner Speed 400 motor into the beast, and an Mtronics RV ECO 20 ESC.
The Futaba S3002 Servo packs real punch and gives the MQ fantastic steering response.
Took it for a blast in the snow. w00t! She flies I tell you, she flies!
Hopefully if the snow builds up a little, I'll get some decent photos of it in action
Attached Images
File Type: jpg mq finished.jpg (611.2 KB, 88 views)
__________________
Second place is the first loser
Reply With Quote
  #7  
Old 01-22-2005, 04:56 PM
Mondo's Avatar
Mondo Mondo is offline
Micrologist/Moderator
 
Join Date: Jun 2002
Location: Bristol, England
Posts: 2,813
Quote:
Originally posted by alfred
Dang, i thought the shocks were of the friction type, didnt realize at all that the shocks were oil filled. Can you give me some good points on the MQ other then the bigger motor. Speaking to Jon from URC since he also owns one told me that it is the bomb. What about the servo what kind is it stock or the one you have in there. (standard, micro, feather)---- you will be my deciding factor in getting one when the 18t is finished.
Alfred has been Quoted from the Gallery Thread

Oops it didn't come with a servo.
It looks like the MQ can take a full size servo if you trim the mouting "ears" off. I had a Futaba S3002 kicking around in my pit box and put it to use.
This servo is strong being metal geared and pretty fast too.

The MQ is a bomb, IMO the best small scale Monster Truck money can buy.
The only improvement I see it needing is CVDs. Other than that, it's perfect.

The Anderson non RTR version is available from this bunch of jokers at $99 minus shipping. I hear their shipping is slow......
Jon from URC arranged mine for me
__________________
Second place is the first loser
Reply With Quote
  #8  
Old 01-22-2005, 05:27 PM
alfred's Avatar
alfred alfred is offline
Super Moderator
 
Join Date: Jun 2004
Location: virginia beach
Posts: 10,128
Send a message via AIM to alfred Send a message via MSN to alfred Send a message via Yahoo to alfred
thanks Mondo for helping me out on my decision
__________________
Xray M18
MRS4-1
540 MRS4
Spektrumized
Reply With Quote
  #9  
Old 01-23-2005, 07:35 AM
Mondo's Avatar
Mondo Mondo is offline
Micrologist/Moderator
 
Join Date: Jun 2002
Location: Bristol, England
Posts: 2,813
Maiden run

I don't know what the performance difference is between the standard 380 motor and the Graupner Speed 400 I fitted.
I'm impressed with the Speed 400's performace and with the standard pinion I get good all round usable power with enough to crawl and a decent top speed. I'm using URC X23 matched packs in the MQ
I took it for a good outside run and the road surface was still a, little wet, so no wheelies!

I noticed it was pulling to one side, upon further inspecion, only one of the rear wheels was driving, the other was free wheeling.
Took the beast inside, took about 5 minutes to strip it down and I noticed one of the standard (composite) CVDs had broken where it slots into the rear diff.
I guess it's time to order some alloy CVDs, I was always a little suspicious about the strength of the plastic units, I guess I came to the right conclusion.

The diffs themselves are of a plastic/composite construction and are nicely sealed. I had to disassemble the diff to get the broken CVD end out. The diffs themselves are nicely made.

So, hop up #1 has to be alloy CVDs
__________________
Second place is the first loser
Reply With Quote
  #10  
Old 01-23-2005, 01:14 PM
alfred's Avatar
alfred alfred is offline
Super Moderator
 
Join Date: Jun 2004
Location: virginia beach
Posts: 10,128
Send a message via AIM to alfred Send a message via MSN to alfred Send a message via Yahoo to alfred
hey Mondo sounds to me that your having a blast now i cant wait to get my hands on one now. As soon as the 18t is done.
__________________
Xray M18
MRS4-1
540 MRS4
Spektrumized
Reply With Quote
  #11  
Old 02-07-2005, 10:10 AM
350Z's Avatar
350Z 350Z is offline
BOUNCY BOUNCY BOUNCY
 
Join Date: Dec 2002
Location: TENNESSEE
Posts: 137
Send a message via AIM to 350Z
Wow very nice truck. It's like a mini e-maxx lol
__________________
And thats my word and i'm sticking to it.
Reply With Quote
  #12  
Old 02-07-2005, 09:38 PM
HO502cid's Avatar
HO502cid HO502cid is offline
IPD racing
 
Join Date: Feb 2002
Location: Tacoma, WA
Posts: 2,525
Send a message via ICQ to HO502cid Send a message via AIM to HO502cid
Re: Mondo's MQ

Quote:
Originally posted by Mondo
man, this MQ Forum needs some livening up..

Here's pics of my Mini-Quake. It's not the Duratrax RTR version, it's the "Anderson MRX4" non-RTR that comes with a standard 380 motor and el-cheapo 600mAh NiMh pack.

So far I fitted a Futaba S3002 MG hi-torque steering servo.
It has a Hitec HFS03MM 40 MHz FM RX fitted. I'm awaiting my Futaba MC230R ESC to come from the U.S. and I got some URC X61 7.2V matched packs for it too.
Lastly it has a ProLine Crowd Pleazer bodyshell that looks a lot better than the canary yellow and Rastafarian green standard shell.
Looks good "Dorkus Maximus".

Whats wrong with Rastfarian yellow and green?
__________________
[ho502cid] [Team IPD] [Team Penguinr/c] [Email me.]

Xray M18 [IPD equipped.]
Tamiya TLT-1 [Penguinr/c equipped.]
Reply With Quote
  #13  
Old 02-11-2005, 06:57 AM
Mondo's Avatar
Mondo Mondo is offline
Micrologist/Moderator
 
Join Date: Jun 2002
Location: Bristol, England
Posts: 2,813
Re: Re: Mondo's MQ

Quote:
Originally posted by HO502cid
Looks good "Dorkus Maximus".

Whats wrong with Rastfarian yellow and green?
"Dorkus Maximus" is the Latin name of that particular dedicated gaming machine

The Rastfarian yellow and green just isn't as classy as the CrowdPleazer

Update:

Jon from URC was doing some hop-up shopping for his equally impressive MQ and I have the following on the way:

Alloy Steering Bellcrank kit
Alloy heatsink motor mount
Alloy CVDs
2 x alloy 380/400 size motor heatsinks
Speed 400 Race Ball bearing motor
__________________
Second place is the first loser
Reply With Quote
  #14  
Old 02-27-2005, 05:14 PM
2G2MAGICSTRATUS's Avatar
2G2MAGICSTRATUS 2G2MAGICSTRATUS is offline
im RICK JAMES BYTCH!!!!!
 
Join Date: Aug 2003
Location: INDIANAPOLIS,IN
Posts: 603
will it fit a 1/10 scale servo?
Reply With Quote
  #15  
Old 02-27-2005, 05:34 PM
Mondo's Avatar
Mondo Mondo is offline
Micrologist/Moderator
 
Join Date: Jun 2002
Location: Bristol, England
Posts: 2,813
Quote:
Originally posted by 2G2MAGICSTRATUS
will it fit a 1/10 scale servo?
From my estimates: Yes, however you will have to trim the "ears" or mounts off the 1/10th servo to make it fit
I use a Futaba S3002MG, more powerful than most 1/10th servos, a lot smaller and unfortunately a lot more expensive too
__________________
Second place is the first loser
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:36 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007 YourMicro.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts