Mamba 25 VS Quark Pro Car 33
Mamba 25 VS Quark Pro Car 33
Ok people have heard my and others opinions on the 2, beyond the differences in opinions of smoothness I will give a technical review.
_________________________________________________
Size and weight.
Mamba 25
Width 23MM x Height 9MM x Length 45MM.
Weight 35 Grams.
Quark Pro Car 33
Width 25MM x Height 6MM x Length 39MM.
Weight 24 Grams without wires, same as Mamba with wires?
_________________________________________________
Amps, Burst, Resistance, Batteries.
Mamba 25
Up to 25 Amps continuous, 50 Amps burst.
Resistance .0022 ohms.
Batteries 4-12 Cells, 2-3 Cells Lipo.
Quark Pro Car 33
Up to 33 Amps continuous, 50 Amps burst.
Resistance .0025 ohms.
Batteries 5-15 Cells, 2-5 Cells Lipo.
_________________________________________________
Features, Settings.
Mamba 25 Manual Setup
Brake-Reverse Type
Reverse Throttle Amount-Strength
Cutoff Voltage
Timing Advance
Starting Power
Mamba 25 Castle Link
Brake-Reverse type
Brake Amount
Reverse Throttle
Punch Control
Drag Brake
Start Power
Motor Timing
Cutoff Voltage
Throttle Curve
Brake Curve
Quark Pro Car 33 Manual Setup
Max-Minimum Radio Throttle
Brake-Reverse
Brake Strength
Drag Break Amount
Battery Selection
Lipo Cutoff
Motor Type
Drag Brake on-off
Race-Safe Mode
Noise Cancellation on-off
Torque Selection
Neutral Range Selection
Delayed Brake-Reverse Time Selection
_________________________________________________
These are the basic technical differences between the 2.
Prices are $76.95 Mamba $88.90 with link Mamba, $79.95 Quark at BPP.
Add $21.95 for the castle link for the Mamba.
I have ran both extensively and I do think the Quark is smoother, more responsive, more programmable.
The mamba is nice because of the USB ability, the link is expensive though.
Technically the Quark is much higher specs, it has a heatsink, and is cheaper than the Mamba with USB.
This concludes my review, feel free to ask me any further questions.
|