Here is the PERFECT esc for the micro-t
Specifications
9 Amp Peak, 3.5 Amp Continuous (> 10 minutes at 24Vdc)
Full Current Limit and Thermal Protection
Proportional Forward and Reverse (no delay), 0-100% PWM
6 to 24 Vdc
Receiver Cable with Universal Plug Installed
Power/Motor Leads Installed (22 AWG High Strand Count Silicone Wire)
Size: 1.2" X 0.52" X 0.29" (Including Protective Covering)
Weight: .33 oz / 9.4 grams (With 12" Cable and 6" Power/Motor Wires)
0.12 oz / 3.3 grams (Without Cable/Wires - Reference Only)
+5 VDC BEC with Over Current, Short Circuit and Thermal Protection
Neutral signal (center stick) safety start-up when powered on
Safety shut-down when RC signal is lost with auto recovery
Motor brake on neutral signal and direction change. Helps protect gears from over stress.