The HS-55 has been regarded as the way to go, you'll have to shave off the tabs. Keep in mind too that if you DO go with your own ESC, you MUST change-out the Servo! The stock Servo is a 5-wire and is completely controlled by the integrated ESC, if you pop a regular ESC in there it won't be able to drive the stock servo.
As far as batteries goes, 2s Lipos have been well tested in the Micro-T already and it handles it NO PROBLEM! You could also go unconventional and run 2p Lipos to really give the Micro-T lots of torque.
The stock batt dimensions are: 32.3mm x 20.8mm x 11.7mm
As long as you can find Lipo packs within that range you're good.
Good luck!
__________________
M18 w/Motek 150 Chassis
- Xray Comp Ball Diff front, Alum Ball Diff rear
- GPM Shocks and rear Drive Shafts
- Mamba 25 ESC w/USB Link (v2.18)
- Mamba 6800Kv Motor (17t/42t pinion/spur)
- Futaba S3102 Servo w/Xray Servo Saver
- Spektrum DX3 Tx w/SR3000 Rx
- Xray Hard Foams front, Med Foams rear
- 2x6cell 1100maH NiMH
- 1x2s 1100maH LiPo
- 1x3s 1100maH LiPo
Losi Micro-T
- Full River 250mah Lipos on the way
Duratax ICE Charger w/temp probe and Backlight mod
|