View Single Post
  #2  
Old 03-25-2007, 10:42 PM
Namuna's Avatar
Namuna Namuna is offline
Super Moderator
 
Join Date: Jul 2006
Location: NJ/NY
Posts: 115
Send a message via AIM to Namuna Send a message via Yahoo to Namuna
Ok, something's not right.

If you've got a 3wire connector on your Lipo, then that must be the Balancing plug...which means you should ALSO have the regular 2 wire as well (the balance plug is extra and should NOT be the only connector in the pack).

Where'd you get the pack? Can you provide a picture?
__________________
M18 w/Motek 150 Chassis
- Xray Comp Ball Diff front, Alum Ball Diff rear
- GPM Shocks and rear Drive Shafts
- Mamba 25 ESC w/USB Link (v2.18)
- Mamba 6800Kv Motor (17t/42t pinion/spur)
- Futaba S3102 Servo w/Xray Servo Saver
- Spektrum DX3 Tx w/SR3000 Rx
- Xray Hard Foams front, Med Foams rear
- 2x6cell 1100maH NiMH
- 1x2s 1100maH LiPo
- 1x3s 1100maH LiPo
Losi Micro-T
- Full River 250mah Lipos on the way
Duratax ICE Charger w/temp probe and Backlight mod
Reply With Quote