YourMicro.com Forums

YourMicro.com Forums (http://yourmicro.com/forums/index.php)
-   Propulse Electronics (http://yourmicro.com/forums/forumdisplay.php?f=81)
-   -   ESC Programming (http://yourmicro.com/forums/showthread.php?t=19791)

johnling 07-24-2007 01:49 PM

ESC Programming
 
What brand ESC is in the Pro-Pulse truck and buggy and where are programming instructions.

Thanks

BloodyBastard 08-19-2007 07:14 PM

Quote:

Originally Posted by johnling (Post 197182)
What brand ESC is in the Pro-Pulse truck and buggy and where are programming instructions.

Thanks

The Electro on the ProPulse is all Megatech manufactured. The only adjustment is switching from 'Street Mode' which includes reverse or 'Race Mode' which excludes reverse.
Otherwise, I am currently unaware of any way to change the pre-programmed acceleration/voltage rate in the esc. Those adjustments are done via motor/gear options and how well you control your trigger finger.

cheers

johnling 08-19-2007 09:20 PM

Quote:

Originally Posted by BloodyBastard (Post 197343)
The Electro on the ProPulse is all Megatech manufactured. The only adjustment is switching from 'Street Mode' which includes reverse or 'Race Mode' which excludes reverse.
Otherwise, I am currently unaware of any way to change the pre-programmed acceleration/voltage rate in the esc. Those adjustments are done via motor/gear options and how well you control your trigger finger.

cheers


Thanks.

Also, the race mode does increase power to the motor. The difference is noticable.

alfred 08-19-2007 09:33 PM

Yes, usually a forward and brake esc will have more power for the motor, the amperage is there because the reverse is disabled...............have you thought about putting a capacitor on your esc.;)

johnling 08-19-2007 10:12 PM

Quote:

Originally Posted by alfred (Post 197346)
Yes, usually a forward and brake esc will have more power for the motor, the amperage is there because the reverse is disabled...............have you thought about putting a capacitor on your esc.;)


It runs quite well but, what would a capacitor do?

alfred 08-19-2007 10:26 PM

check out the link provided........it should answer your questions...... http://www.rczone.net/modules.php?na...rticle&sid=373

And here is how to install the cap onto the esc...... http://yourmicro.com/forums/showthread.php?t=18376


All times are GMT -5. The time now is 05:37 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007 YourMicro.com