YourMicro.com Forums

YourMicro.com Forums (http://yourmicro.com/forums/index.php)
-   Duratrax Vendetta Discussion (http://yourmicro.com/forums/forumdisplay.php?f=50)
-   -   Vendetta ST help (http://yourmicro.com/forums/showthread.php?t=20571)

artur310 01-13-2009 02:26 AM

Vendetta ST help
 
Writhing is hard. So I brought quark procar 22a, and now sitting here at home crying. It seems that I can't put a permax 400 on it?? or can I! I do have vendetta and don't know what to do with that new quark 22a. Can someone recommend a perfect motor for it, doesn't matter how much it cost.

artur310 01-13-2009 02:55 PM

Vendetta st help
 
I brought quark procar 22a in the hurry and then realized it was weak thing.

So any recommendations for procar 22a and vendettas st as for a motor?

jaejw1 01-14-2009 04:48 PM

just get the castle creations 10th scale sidewinder... it will cost the same as any good motor out there.. and when your ready to upgrade to a more powerful motor like the neu 1105/1.5y or the 1105/2y.. then you can use the same sidewinder..

artur310 01-15-2009 12:10 AM

Vendetta ST help
 
Quote:

Originally Posted by jaejw1 (Post 202684)
just get the castle creations 10th scale sidewinder... it will cost the same as any good motor out there.. and when your ready to upgrade to a more powerful motor like the neu 1105/1.5y or the 1105/2y.. then you can use the same sidewinder..

jaejw1 did you mean to get 10th scale motor, and than upgrade when ready to neu without changing the esc.

Quarks esc say 22a continuous and 35 surge, does that mean I should look for motor that takes amps in between 22 and 35?:confused:

Jeez I'm so damb in this stuff:eek:

jaejw1 01-15-2009 10:51 AM

Quote:

Originally Posted by artur310 (Post 202688)
jaejw1 did you mean to get 10th scale motor, and than upgrade when ready to neu without changing the esc.

Quarks esc say 22a continuous and 35 surge, does that mean I should look for motor that takes amps in between 22 and 35?:confused:

Jeez I'm so damb in this stuff:eek:

the sidewinder is a 10th sclae brushless speed controller...

get that speedo and use the ammo 28-35-3900

read this.. http://www.yourmicro.com/forums/showthread.php?t=20574

jaejw1 01-15-2009 10:54 AM

for a good idea on what these motors can do... check youtubbe.. and search "vendetta ammo" and "vendetta neu"

artur310 01-16-2009 02:24 PM

Vendetta ST help
 
Hello, I have found Permax 400/8D motor that has this Specifications, and I think it would work with Quark pro car 22A. Any recomendations?:confused:

Diameter


28mm

Length


36.5mm

Shaft Diameter


3.2mm

Weight


74g

Kv


2500 rpm/V

Efficient Current


10-20A

Max Current


25A (30sec)

Number of cells


7-12 Nixx, 2-4 Li-po

jaejw1 01-16-2009 02:36 PM

lookslike a winner,,,, wont be fast,,, but it will be faster than stock,,, have more torque and run cooler..... if u gear it right,,,,, u will definatley need a 41t spur for it,,,,

artur310 01-17-2009 08:52 PM

Vendetta ST help
 
Hey jew, what esc and lipo do you use with permax motor?? :D

jaejw1 01-18-2009 12:39 AM

im currently using the mamba max. but the 10th scale sidewinder will be more than enough... and the lipo i use is this one.. http://www.rchobbysports.com/index.p...oducts_id=2856

artur310 01-27-2009 01:31 AM

Vendetta St help
 
How about cogging, does 10th scale esc sidewinder has any problems with that, Quark esc has zero cogging (so it says in the manual).:confused::):confused::):confused::):eek:

jaejw1 01-27-2009 10:48 AM

http://www.youtube.com/watch?v=eh7OJ751Vt4

he is using the sidewinder..

artur310 01-30-2009 01:10 PM

Vendetta st help
 
All right, as you know I still have Quark 22a brushless esc, would anyone recommend best motor that can be used with it? I have vendetta st. Will use lipo.
Thanx

Arthur

artur310 01-31-2009 05:28 PM

Vendetta st help
 
Hey to everyone. As I am not an expert in rc stuff, can anyone tell me, what can I do to expand the range of how far the car can go. Currently my vendetta st, which is all stock, can go about 50 feet away, after that it still drives but it starts to TURN wheels by itself in multiple directions. I or the car you can say, have crashed it self in to walls and other objects multiple times. On the Tx on the crystal panel it says 75.630 MHZ, and on the crystal on the car it says just 72. Should I buy crystals that have higher number or is it the Tx that bad.

And from the last post what's the best motor for Quark 22A.

Thanx

Arthur

artur310 02-01-2009 01:24 AM

Vendetta st help
 
So if I upgrade a transmitter to what should I upgrade? Reracing and jaejw1 or anyone?


All times are GMT -5. The time now is 05:38 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007 YourMicro.com