YourMicro.com Forums

YourMicro.com Forums (http://yourmicro.com/forums/index.php)
-   Mini-LST Motors (http://yourmicro.com/forums/forumdisplay.php?f=40)
-   -   BL or modified? (http://yourmicro.com/forums/showthread.php?t=17677)

hop-up junkie 12-26-2005 12:07 AM

BL or modified?
 
hey guys new to the site and to the mini lst.......heres my question....im goin to have to go lipo for sure...the runtimes from what ive read are 10 minutes....what a tease......but im looking at $70 for the krystals...or ..what $130-150 for BL....i dont need a killer top speed (even though its great fun)....but i do want power..and i might aswell get it right the first time...i had a tricked out rc18t after it came out ...all aluminum mamba 6800...and a 10cell pack....that thing was crazy fast...but i had to watch the temps ..due to the wieght of the aluminum im sure but i needed that so i wasnt breaking c-hubs and suspension arms all the time....the lst seems heavy...i guess im looking for the best bang temps and runtime ...with this truck wich is better 2 modifieds or a brushless......thanks

Xtant3150c 12-26-2005 04:35 PM

I would say go brushless!

And would suggest either the AON 4900 or the Hyperion 5k or 6k motor.

Checkout Bishop Power Products

The AON is a direct fit and has tons of torque.

The Hyperion 5k has similar torque and the 6k has more top end, also with the Hyperion's you will need to grind some material off the motor mount to fit them on. As they have a bigger bearing housing.

Member Toys is running a AON 4900 in his MLST and loves it for bashing! You can always play with gearing to get more speed.

I got a Hyperion 6k for my MLST but due to some dual brushless testing my truck is on the shelf!hehehe

hop-up junkie 12-26-2005 04:39 PM

cool ill look into those ..thanks for the info

Xtant3150c 12-26-2005 08:31 PM

Quote:

Originally posted by hop-up junkie
cool ill look into those ..thanks for the info

No problem.:D

SWAMPER 01-16-2006 03:08 PM

was looking at running one BL motor whats the best one, was looking at the mamba 5400kv or 6800kv

Big-Kid 01-17-2006 02:56 PM

Both motors are ok, but if you're gloing to be running it in your MLST Swamper, the the 6800 might be the better choice.

It wil also depended on what you arwe loking to get out of your BL motor. Are you lookiing for wheelie popping torque, or "stupid fast" top end? High speed runs are hindered by the increased weight and not-as-smooth-drivetrain when compared to something like the RC18T. BL motors with the higher KV rating will be tuned for those high sped runs.

For more torque, look at that 6800 Mamba, the Hyperion's 5K or 6K, AON 4900 or even the Tekin motors.

Batteries will always play an important role in how much speed and power is unleashed from your motor(s). Better batteries or more voltage will net better results.:cool:

SWAMPER 01-17-2006 03:01 PM

looking for a good bashing and track running motor, not going to
race it or run it onroad and i just picked up a 1900 lipo so the low volt cut off of the mamba esc is nice, just don't want something that rips the drive line apart or flips over every time i hit the gas

Xtant3150c 01-17-2006 05:22 PM

Yeah I would say go with the 6800 also.

It works well in the MLST on road and should work good on an off road track.

The 6800 will have less torque compared to the 5400 or the Hyperion and AON motors. But that also means it should be a little easier on the drivetrain!

I really like the Hyperion 6kv though! As it gives a good balance of speed and power!

And with the mamba esc you can set the punch control to lessen the affect of the torque on the drivetrain.

Big-Kid 01-18-2006 03:46 AM

Having an adjustable ESC like the Castle C. and Tekin are, is helpfull. I would think speed controls will be heading in that direction, as far as future advancements go. It just makes setting up so much easier, being able to alter the different settings.

Now weather the Mamba Link or Tekins on-board programming are "better" than the other, the debate has gotten heated many, many times:rolleyes: . Both have pro's and con's, just figure out which works best for you:D . :cool:

SWAMPER 01-18-2006 05:52 AM

anyone have a used BL and ESC for sale :D or where is the best plase best price, to get one

hockeypux19 01-18-2006 06:24 AM

Look at the second post in this thread.....b-p-p.com..Xtant has good info for you and Bishop are great people to deal with. I would recommend getting the phx-link programming cable if end up with the Mamba esc....Makes programing a snap....You can also save setups so you can revert back or modify with the click of the mouse.
Remember that the larger can bl will have the torque you will need to carry the heavier 4x4 drivetrain....The hyperion and AON motors on their site are packaged with the Mamba esc If you want them that way and are 300 size motor can. The Mamba and Tekin motors I believe are either 180 or 200 size cans.

SWAMPER 01-18-2006 07:43 AM

so witch would be a better deal the mamba 6800 & esc or the Hyperion YC-22 6000 & mamba 25 esc
and are they both a direct bolt in or do I need to modify the mounting bracket

hockeypux19 01-18-2006 08:50 AM

Dude...Read the second post again....The mambas are direct fit also.
If I was putting it in a 4x4 like the MLST My choice would definatly be the larger can AON or Hyperion

mostly broken 01-20-2006 12:15 AM

so can I use the stock radio and receiver and run a brushless?

hockeypux19 01-20-2006 05:32 AM

Sure can......Brushless motors just need to be paired with brushless esc's.


All times are GMT -5. The time now is 08:44 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007 YourMicro.com