YourMicro.com Forums

YourMicro.com Forums (http://yourmicro.com/forums/index.php)
-   Europe (http://yourmicro.com/forums/forumdisplay.php?f=19)
-   -   UK Micro Challenge 3 - March 25th 2007 (http://yourmicro.com/forums/showthread.php?t=18982)

c0sie 12-18-2006 11:59 AM

UK Micro Challenge 3 - March 25th 2007
 
Dear all.

Please find below details of the Classes for the forthcoming UK Micro Challenge 3 to be held on March 25th 2007.

The entry forms for this event will be availiable on 4th January 2007, with the entrys closing on 11th March 2007.

Please also be advised that any entry form recieved after they are released that is not fully completed, or that does not come with a stamped addressed envelope, or that does not come with payment for your classes will not be excepted!

Remember, UK Micro Challenge 3 is going to be bigger and better than any event we have done before! Tell your friends, race club members and anyone you know with a micro RC!

In the mean time, all of us at the UK Micro Challenge would like to wish you all a VERY merry christmas and a very happy new year!

Kind Regards,

Cris.

Quote:

WHERE:
TRRAC, Torc High School , Glascote Lane, Glascote Heath, Tamworth, Staffordshire.


FORMAT:
Four rounds of 5 minute qualifying followed by one 5 minute final.


CLASSES:

1/18th Scale Buggies & Truggies:
AE RC18T, AE RC18B, XRAY M18T, FTX Blaze, Losi Mini-T, TTR ZK/ZT2 etc…


Class 1 – Pro Stock
Any brushed micro motor, no larger than 400 size .
Any Stadium Truck or Buggy micro shell.
Any chassis with any chassis modifications. **
A maximum of six 2/3A NiMh 1.2V cells to be used. (No Li-Po's).
Any foam or rubber tyres on any wheel with a maximum wheel width of 36mm. (NO additive!)

Class 2 – Modified
Any brushless micro motor to be rated no higher than 8000kV, no wider than 25mm and no longer than 34mm in length.
Any Stadium Truck or Buggy micro shell.
Any chassis with any chassis modifications. **
A maximum of six 2/3A NiMh 1.2V cells to be used. (No Li-Po's).
Any foam or rubber tyres on any wheel with a maximum wheel width of 36mm. (NO additive!)


1/16th Scale Buggies & Truggies:
Mini-CDB, Kyosho Half 8/ST, Tamiya Tamtech series, Nano Dragon series, Team Bluegroove series etc…


Class 3 – Open
Any micro motor, brushed or brushless. Brushed motors are to be no larger than 400 size. Brushless motors are to be no higher than 8000kV, no wider than 25mm and no longer than 34mm in length.
Any Stadium Truck or Buggy micro shell.
Any chassis with any chassis modifications. **
A maximum of eight 2/3A NiMh 1.2V cells to be used. (No Li-Po's).
Any foam or rubber tyres on any wheel with a maximum wheel width of 36mm. (NO additive!)


1/18th Scale Monster Trucks:
FTX Roxster, Losi Mini-LST, ACME Leopard, XRAY M18MT, AE RC18MT, Hot Bodies Minizilla etc…


Class 4 – Open

A maximum of 2 micro motors, brushed or brushless. Brushed motors are to be no larger than 400 size. Brushless motors are to be no higher than 8000kV, no wider than 25mm and no longer than 34mm in length. Any Monster Truck or Stadium Truck micro shell.
Any chassis with any chassis modifications. **
A maximum of six 2/3A NiMh 1.2V cells to be used. (No Li-Po's).
Any foam or rubber tyres on any wheel. (NO additive!)


** See General Rules section.


General:

All chassis' entered into classes 1, 2, 3 and 4 must not increase the overall width or overall length of the buggy or truck from those dimensions originally intended by the original manufacturer of the vehicle.

All vehicles entered into classes 1, 2, 3 and 4 must use wishbones that do not increase the overall width of the buggy or truck from those dimensions originally intended by the original manufacturer of the vehicle.

Classes 1, 2 and 3 are allowed to run any wheel, but with a maximum wheel width of 36mm.

Class 4 may run any RC wheel.

EVERYONE who enters MUST be a BRCA member and have an up-to-date membership with their card as proof on the day.

The micro RC vehicle you enter the event with is the vehicle you MUST run on the day.

If you need to swap classes before the event you MUST inform the Event Secretary as early as possible.

NO TYRE ADDITIVES ARE ALLOWED.

Trophies will be awarded to 1 st, 2nd, and 3rd in each final. There will also be a Concourse competition.

Pit tables and 240v supply available. A heat list and time table will be posted in the week prior to the event to all competitors.

Any vehicle found racing in a class it does not belong in (AE RC18MT or XRAY M18MT in Class 1 for example) will be removed from the race meeting until it meets the requirements of the class of which it originally was entered into.

On site food will be available.


ENTRY FEE:

£8.00 for a single entry. (Additional classes are £6.50 each).
Any question please email me:

webmaster@uk-microrc.co.uk

c0sie 12-30-2006 08:41 PM

Entry form:
CLICK HERE

Promotional flyer:
CLICK HERE

Remember, there are only 80 places available and its 'first come first served'....so get those forms in soon!

:)

c0sie 01-06-2007 06:49 AM

Class 1 - 1/18th Buggies/Truggies PRO STOCK

Colin Long - AE RC18
Mark Mitchell - FTX Blaze
Adam Fisher - AE RC18
Robert Chalmers - Yokomo MB4
Chris Green - FTX Blaze
Lee Carr - AE RC18
Dez Chand - FTX Blaze
Anthony Barrass - AE RC18
Allan Davies - FTX Blaze
Chris Hudson - FTX Blaze
Peter Ellis - Anderson MB4
Carl Bloomfield - FTX Blaze
Scott Bass - AE RC18
David Studd - FTX Blaze
Chris Gunter - FTX Blaze
---

CLASS 2 - 1/18th Buggies/Truggies MODIFIED

Colin Long - Losi Mini T
Jason Moller - XRay M18T
Graham Oliver - FTX Blaze
Daniel Lewis - AE RC18
Bill Pier - FTX Blaze
Tom Hudson - FTX Blaze
Chris Hudson - FTX Blaze
David Bassou - Losi Mini T
Paul Leach - AE RC18
---

CLASS 3 - 1/16th Buggies/Truggies OPEN

Edward Moller - Mini Inferno
Martin Reeder - Tamiya GB-01
Glenn Holder - Mini Inferno
Carl Bloomfield - Mini Inferno
Cain - Mini Inferno
---

CLASS 4 - 1/18th Monster Trucks OPEN

---

RESERVES (All Classes)

---


Class 1 Entries Left = 25, Reserves = 0
Class 2 Entries Left = 11, Reserves = 0
Class 3 Entries Left = 5, Reserves = 0
Class 4 Entries Left = 10, Reserves = 0
Total Entries Left = 51, Reserves = 0

c0sie 01-09-2007 07:20 AM

Glad to see alot of people from UKMC1 & 2 re-entering smile.gif
Glad to see Cain and Co. (my UKMC drinking buddys), Reigning 1/18th Offroad Brushed and Brushless Champion Chris Hudson, Dez Chand (RRCi Editor), Scott Bass (1/8th Rallycross arse-whooper), Colin Long (RCKingdom owner), Mark Mitchell (tallest bloke ive ever met! And Tamiya EuroCup racer), Martin Reeder (Tamiya EuroCup webmaster), Graham Oliver (Dominated Onroad at UKMC1 & 2 but now trying his hand at Offroad), Jason Moller (of Glypo fame, for all the rallycrossers)..

And alot of new names which is great!


All times are GMT -5. The time now is 10:21 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007 YourMicro.com