YourMicro.com Forums

YourMicro.com Forums (http://yourmicro.com/forums/index.php)
-   Mini-T Motors (http://yourmicro.com/forums/forumdisplay.php?f=88)
-   -   HELP! motor problem! mini t wont go! (http://yourmicro.com/forums/showthread.php?t=19685)

flyboy1304 06-12-2007 03:54 PM

HELP! motor problem! mini t wont go!
 
I just bought and installed a Trinity monster 17turn pro. and i read the instructions and did as they instructed and my mini will run for a sec and shut not go or just not go at all..... Any ideas? do i need to upgrade my ESC? If so which would be the best? and Cheapest? I'm new to the rc scene and don't know what to do.... and help would be GREATLY appreciated!!! Thanks

alfred 06-12-2007 06:18 PM

1 Attachment(s)
First off you need to check the connection between the rx and the esc plug, if you have too use a small flat tip to push in each lead----please take a look at the pic-----and the next thing you need to do is to make sure that the motor leads on the back of the motor are still soldered on....

flyboy1304 06-14-2007 09:34 AM

I did everything is in place i believe that i need an aftermarket esc. Which esc do you think i should purchase? Trying not to spend alot.... Thanks

alfred 06-14-2007 11:45 AM

Well since you dont want to spend much, then i would check ebay,.......just put in electronic speed control and see what you come up with. You should find tons........on your T isnt the rx and speed control all one unit.

mini_t_mamba 06-29-2007 11:37 AM

Yeah you need a new ESC and reciver.


All times are GMT -5. The time now is 04:37 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007 YourMicro.com