repair tips
ok i have a problem with my steering servo.. where one of the wires split right close to the servo itself.. there isn't much to solder back together?
is it worth opening it up and trying to extent wires? or is it the garbage bin throw? |
You have nothing to lose from opening up the servo to see if you can make a repair. Failing that, a micro servo is fairly cheap and easy to find and you can salvage the case and gears and the connector from the one you have now.
|
Put one on order now and try to fix the the wire.....all you have to do is use a smaller gauge wire to extend that wire only and it should be good to go.
|
Go see Louie at sounder (car stereo place on C line in Orangeville) he is an electronics guru and rabid r/c guy too he will resolder in about 3 minutes for you
|
nah i don't need to see louie , soldered it up after opening it up.. but i think the heat from the gun messed up the board cuz now it makes buzzing sounds and its a bit twitchy , but for now .. it works :D now all i gota do is get a charger that doesn't take 6 hours to fully charge
|
All times are GMT -5. The time now is 02:22 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007 YourMicro.com