View Full Version : question on flash esc
xlr8si
03-26-2002, 01:40 PM
how many cells can this esc handle? i was planning on buying this esc along with 8 brick cells, don't want to make a mistake in buying it if it can't handle it
Mykroe
03-26-2002, 03:46 PM
i THINK it is rated for 7.2v or six cells
Orion originally warned against using over 7.2 volts and do not use a Speed 300 or BB. Don't know if that has changed with the "fixed" version.
TFRMicro
03-28-2002, 01:35 PM
well, you could use the BB or Speed 300 now if you add one more capacitor...
Sick speed
03-31-2002, 04:07 PM
It can handle 8 cells. But the question is, can you handle IT?
TFRMicro
03-31-2002, 06:33 PM
Originally posted by Sick speed
It can handle 8 cells. But the question is, can you handle IT?
I dont think the Flash can handle 8 cells, so you can't say if you can handle it or not....the Flash can't...
xxtcrgp
04-01-2002, 04:38 AM
straight from team orions website:
Number of cells : 4 to 8 4,8 Volts to 9,6 Volts
Current : 5amps continuous, 25amps peak (2 seconds)
Weight : 30gr (including wires)
Size : 38mm x 33mm x 5mm
Brake : 14 amps
BEC : 5 volts, 1 amp, ultra low loss
TFRMicro
04-01-2002, 11:21 AM
Originally posted by xxtcrgp
straight from team orions website:
Number of cells : 4 to 8 4,8 Volts to 9,6 Volts
Current : 5amps continuous, 25amps peak (2 seconds)
Weight : 30gr (including wires)
Size : 38mm x 33mm x 5mm
Brake : 14 amps
BEC : 5 volts, 1 amp, ultra low loss
oh, so it could handle 8 cells, but i wouldn't recommand you put 8 cells for flash...
30gram for the flash? r u sure?
jra111
04-01-2002, 11:37 AM
I was thinking of getting one also,does it have reverse and can it handle a BB with 7.2volts?
TFRMicro
04-01-2002, 11:47 AM
it can handle the BB if you add another cap on...
and it has reverse...
Sick speed
04-02-2002, 08:03 PM
see, what did i tell you? Just because it says "Micro Novince", i know quite abit about the micro and i wouldn't post specs like that unless i was sure of them.
vBulletin® v3.7.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.