PDA

View Full Version : My propulse is looking awesome


Jeffrey112
09-01-2007, 08:13 PM
So far I have got a new Hs65 servo. I also ordered a baja motor and a gear set. I have just made a clear plastic spoiler.I think it looks good but Thats just me. I want to get into painting my own bodies. How do i do it. Pics will be up on the week. It doesnt look like much. I want to the titamium or steel turnbuckles, graphite driveshaft, 18Mt tires, and alumiun shocks. I will probably get them probably by christmas.

Erock 808
09-01-2007, 08:54 PM
You're going to have to do some modifications to use the Hi-Tec HS65 servo in your Pro-Pulse. I'd really like to see some pictures of your ride when you get the chance.

babetta80
09-01-2007, 10:07 PM
yeah, the hs-65 can use the original mount and holes, but the servo-saver does not fit. you really don't need it with the karbonite gears, so thats ok. i just drilled out the hole second from the bottom on the included servo arm, and threaded in the pivot ball fitting that was used on the servo saver.

Jeffrey112
09-02-2007, 08:00 AM
The hs65kg or whatever inly took about an hour to put in. I used the included arm and just used one of the screws it came with. There is a little more slop, but I hoe when I get the titanim turnbuckles that will go away. Te servo is so much better that stock. I hope it wont strip. It turns faster and has alot more torque.

babetta80
09-02-2007, 09:36 AM
did you connect to the original steering arm? can you post some pics of the setup?

thanks

Jeffrey112
09-02-2007, 04:25 PM
I just took off the spoiler it didnt look to awesome. I will post puctures when I get my new motor and gears. Then I am going to order steel tunbuckles and graphite center shaft. Then I will get aluminum shocks.

ZumiezRacer
09-03-2007, 01:04 AM
sounds liek your having fun....

sdjennings4304
02-28-2009, 04:02 PM
I know this is a discussion forum but I just want to find someone who would appreciate this item. I have never been in RC's that much until I found the B-100 @ Radio Shack. It was on sale for $50 and so I bought it and one of every available part and wheels. I worked in mine for about a week and changed the shocks, wheels, Dif cover Suspension tower and got it running pretty well. I have worked on it allot more than I have driven it. I just like tinkering with it more I guess. The bat was running low so I lost control of it in the house and it shot under my dresser tearing off the passenger wheel arm and breaking off that (CV shaft) for lack of a better term. Every thing else is there plus I have.....
Titanium Turnbuckles &Servo Saver Kit (1 never opened)
Aluminum oil-filled Shocks 1 new in package & (1 installed) still have the old ones
Front and rear Shock tower kit (1 part installed)
Spur gear and pinion gear kit (2 kits never opened)
Drive shaft and gearbox case (one installed)
Twin motor conversion kit new (never opened)
Durability hard ware kit (never opened)
Antenna tubes and body clips kit. (Never opened)
High speed motor kit (never opened)
And of course
The controller, batteries, the B-100 the wall charger and batt pack
And oh yes
Slick tires on rims (Installed and used in street 5-6 times)
Studded dirt tires on the rim (Slightly used 3-4 times)
All-Terrain Tires (Never opened) on rim
And Ribbed Tires on rim (never opened)
I have the blue buggy body


I didn't want to just through all of this on craigslist because I figured someone here might really want or need it.

I was hoping to get $65 back out of it. Let me know if you need it.
I am hoping to sell it together.
You can get me at 405-923-2263
Or sdjennings4304@cox.net