PDA

View Full Version : i have different turning radiuses


jguzman
02-17-2002, 04:30 PM
my micro turns tends to spin out when making left turns, and understeers when making right turns...i tried playing with the steering end point adjustments, but i'd like to get it more neutral from the start...what can i do to make it so it turns evenly??? i run a futaba 3003 servo, a futaba mr230 esc, 6 cells, kit motor, and a novak xxl receiver...everything else is stock...thanks in advance!

xxtcrgp
02-17-2002, 05:06 PM
the same thing happened to me and i found out that my servo was slightly crooked. Try removing your servo and mount it using shoo goo II, you can get a tube of it at walmart. Hope this helps

HYDRAMATIC99
02-17-2002, 05:46 PM
Make sure your battery is centered and your diff's are not binding.

xxtcrgp
02-17-2002, 06:20 PM
oh ya forgot about those, thanks

Kingtooshy
02-18-2002, 08:06 AM
make shure your servo arm is centered when you take off all trim if its noy you could have it so the servo reaches its end point to so soon