PDA

View Full Version : Existing Parts For TLT-1


pkh
02-12-2004, 08:57 PM
Well, I'm starting this thread to post some replacement and upgrade parts that I found to already exist in Tamiya's stock of parts, due to the fact that the parts are used on other chassis. If anyone else finds some existing Tamiya replacement or option parts that fit, please post them here!

Wheel Axles: Kit Part# BJ1, Tamiya Part# 50823
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGM41&P=7

Pinion Gears:
24T & 25T (stock part is 24T):
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGF72&P=7

22T & 23T:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGJ70&P=7

20T & 21T:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGJ69&P=7

18T & 19T:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGJ68&P=7

16T & 17T:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGJ67&P=7

pkh
02-12-2004, 09:16 PM
Differential Bevel Gears (for the front and rear gear diffs):
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGK41&P=7

Uprights or steering knuckles (same as TA04):
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWB85&P=M

Servo saver parts tree:
http://www2.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=50473

King Pins (TA04):
http://www2.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=50882

Center Ball Diff Plates:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWB98&P=7

pkh
02-12-2004, 09:44 PM
You can also just go to Tower's website and type in the Tamiya part number (on the back of the manual) and it will find it for you. Several of them are TLT-1 specific, though, and aren't in stock yet...