picture of my tricked out micro.

[pisnonvtec]

Finally got a hold of a digital camera. enjoy!!!
this car performs like a 1/12 scale car.!!!

mod list
------------------
Speed 300 motor
Hpi 12t metal pinion
Arm motor plate
Quantum reverse esc
Novak xxl rx
Hitech hs81mg servo
GTP steering with hitech short throw servo horn.
Nuclear 6 cell 2/3aa 750 mah battery center on chasis
GPM front diff outputs
GPM Front knuckles
HPI universals
GH front ball diff
Team Homies rear ball diff w/delrin spur.
GH alloy front pulley
Gh allow bulk head
GH 98mm front wheel adapters
GH rear 101mm rear wheel adapter.
Integy front springs
ratzas pro racer pan chasis w/custom lexan underguard.
IPD upperdeck lowered 6mm!!
IPD vcs rear upperdeck.
AE VCS shock with ratzas black spring.
car lowered 3mm front and 1.5 rear. (Car has slight rake.)

[pisnonvtec]

another one!!

all parts were purchased from the following

1: http://www.pumaent.com
2: http://www.microshop.com
3: http://www.micrors4racer.com

[xxtcrgp]

nice car, to finish it off you should've got a front purple bulkhead and you should get a rear aluminum bulkhead just to make it look nice;)

[tc rcr]

nice looking micro

[pyre]

GREAT!!!!!!! looking micro, i like that, i want mine to look like that at some piont! how much money do y9ou have invested so far?

thanks
omega

[pisnonvtec]

thanks for the compliments!!
xxtcrgp, I might just do that. I am looking for a rear aluminum bulkhead that will work with the speed 300 motor though..

pyre ,
I really don't like to think about the cost, if you know what I mean? $$$$$$$$$

[pyre]

i know just what you mean man......lol

later pyre

[3.5SE]

The cost of tricking out a micro can get insane. If you do it to the max it will probably cost around $700-$1000. I think I'm over $400 and climbing. I haven't even assembled my trick parts yet, still stock and waiting for my first street run. I think I'm going to get that lexan sheet before I take a street run.

[pisnonvtec]

Originally posted by 3.5SE
The cost of tricking out a micro can get insane. If you do it to the max it will probably cost around $700-$1000. I think I'm over $400 and climbing.

I know what you mean!!
I think I will take a break from my micro and start hopping up
my XRAY t1.

I just like building and hopping them up!!! I think
this goes for all my cars especially my classic 68 stang.

[Turbo Cloud]

Put them in the right forum spot buddy cuz their is one just for micro pics

[3.5SE]

I like the building and hopping them up too. I don't race just like to take it to the street and run it once and a while. I am 27 and it's getting embarrassing running the car at my age. I need to buy a house so I can build my own private track in the back yard.

[pisnonvtec]

Originally posted by Turbo Cloud
Put them in the right forum spot buddy cuz their is one just for micro pics

Oops, sorry I just found out about that forum BUDDY!! what's done is done. If the
moderator wan'ts to move it their, Go right ahead!! Not a big deal!!:o

[Turbo Cloud]

should have put it in the right forum next time do please

[pisnonvtec]

3.5SE,
I know what you mean!! I really don't drive it to often, maybe
occasionally on carpet. Just like to keep tweekin it out.

Yeah, I need to kickback though on the spending sprees on my
toys!! I have a mortgage & family to take care of..

I'M actually thinking about auctioning it off on ebay.. I want to get
into nitro now.

[TFRMicro]

Nice..

[xxtcrgp]

i used my speed 300 with my Jet racing rear aluminum bulkhead, all i did was drill a hole into my speed 300, but you have to be careful not to drill into the armature.

[3.5SE]

pisnonvtec

The building is what I really enjoy, then my wife wonders why I buy these things. Nitro is cool and I've been considering going that route. I think I'd use that more. Maybe a rally converted Nitro TC3?

[TGRupert]

I've been thinking up a micro with 4 wheel inependant suspention and 4 wheel steering. I've been thinking about adding a second motor and maybe even extending the wheels out like a stadium truck, if i did that I would have to use some really high torqe servos. Right now it's just an idea, but i'd like to make it. just wish I had a partner to make it with, but I don't know anyone who lives near me that would want to.

[xxtcrgp]

I think I have a hack job idea for the 4 wheel independant suspension

[fuse01]

hi
nice setup you have there.
Could you tell me how u mount the battery (6cell 2/3A) in the middle?

using rataz pan and 85mg with gtp steering but no top deck

[Microbrew]

I was gonna ask the same question, how's the battery mounted??

Nice looking car......

[MDM3]

Like the Avatar xxtcrgp.

[xxtcrgp]

haha, thanks:p

[TFRMicro]

pisnonvtec, did you sell you micro yet?

[MicroGTR]

have any1 hered anything about the nitro minis??, if so then how much

[TFRMicro]

huh??wtf??

why are you asking a question here?

[MicroGTR]

becayse i was wondering

[TFRMicro]

you could start up a new thread...but this forum is just for HPI Micro...

you should ask in HPI forum....they will have a repond faster...:)

[TGRupert]

yeah, there is a section called "General RC"

[xxtcrgp]

people calm down. At least he isn't flooding the forum. Its not a big deal

[TGRupert]

i'm not mad, I was jus splanin' the different parts of the forum. Instead of saying "don't do this here" I said "do this over there"