PDA

View Full Version : 250 Mah Lipo battery!!!


m18_racer
01-06-2007, 03:53 PM
I found this battery pack made by ETEC at www.StevensAero.com . it has almost the same dimensions as the stock battery pack and could (should) be a direct replacement. and if your thinking.. i wonder if the stock ep can handle this:confused: .. well YES! there is an article over at one18th and the guys said it flipped on its back from a standstill... and that it reminded him of the mamba powered mini-ts.

here is a dirrect link to the battery pack. it only costs 16 dollars
http://www.stevensaero.com/shop/product.php?productid=16335&cat=368&page=1

so what do you guys think?

alfred
01-06-2007, 07:03 PM
cool man.....should have some speed.:D

m18_racer
01-06-2007, 07:09 PM
yup... it might have someee speed.. al, are u going to pick one of these up? there in stock again

alfred
01-06-2007, 07:16 PM
Naw im not interested at all.......but let us know how the batt goes.:D

m18_racer
01-06-2007, 07:19 PM
i was talking about micro ts.. not the battery,,, what did u think i was talking about?

alfred
01-06-2007, 07:21 PM
Yes i know what you mean....and i said i wasnt interested in getting one......and since your getting that batt, i also said cool let us know how it goes....lol.

m18_racer
01-06-2007, 07:56 PM
... vid with lipo ... http://youtube.com/watch?v=MxDj77FsOzY

alfred
01-06-2007, 08:05 PM
Nice and zippy.:D

m18_racer
01-06-2007, 08:17 PM
yup.. im probally not going to rewind my motor... i want it to be a car not an AIRplane.im still going to install some neo magnets to get some more torque.

Namuna
01-06-2007, 09:05 PM
The length and thickness are close to exactly the same as the stock NiMH pack, the only concern is the width being about 5mm bigger than stock.

I know for sure though that the Etec 210maH batts are a direct fit, unfortunately I can't find them anywhere.

m18_racer
01-06-2007, 09:18 PM
well ill be getting the micro-t and the lipo around wed. so ill see how it fits in the stock chassis... all i was concerned about was mostly the lenth. it will fit perfect on my cf chassis... ill make it! lol. ill search for the ETEC 210 too.

m18_racer
01-09-2007, 09:26 PM
http://www.wattsup.co.nz/catalog/product_info.php?cPath=47_79&products_id=1051

Lostinturn3
01-28-2007, 04:26 PM
nice setup m18. are you running the stock esc, servo, rx with the 2 cell lipo? i wanna go lipo, but i am not sure if the speedo would hold up to the additional power.

also, AL! here's your chance to get a "little" into lipos!!!

alfred
01-28-2007, 05:16 PM
Yeah i just dont know if im ready to go that route at this moment.:)

Lostinturn3
01-30-2007, 08:51 AM
fair enough.

C_Heath
01-30-2007, 09:38 PM
This is embarrassing but today, I just came in here to laugh my ass off at that avatar! I really didnt want to read anything.

Is that wrong? LMAO

alfred
01-30-2007, 10:23 PM
Yes it is, you just might have a problem....lmao......yeah when i was looking for avatars i came across this and thought i should put it up....made me laugh my butt off as well.:D

Lostinturn3
02-18-2007, 10:28 PM
the batt @ stevensaero.com is out of stock. does anyone know where i can find 1?

microtime
03-06-2007, 08:30 AM
Hey,
I was on the horizon site yesterday and in march a new lipo will be released with charger. Also a charger for stock battery avalible:D

Lostinturn3
03-06-2007, 07:27 PM
nice.

keep me posted!

NitroRyda
03-07-2007, 01:15 PM
nice!!!!!
10char