micro-t chassis...

[m18_racer]

hey check this out.... http://www.pro-z.com/jrxz/

[alfred]

Dude, now that is nice........and the best part is you have a lil bit of room to use your own electronics.:D

[m18_racer]

:D yup, but the bad thing is that their out of stock. but when theyre in stock im sure some people here SHOULD get them :D

[Fajita Dave]

Geez the things bairly been out for a month!

[m18_racer]

hey im going to be getting a micro-t off of ebay soon. im going to be getting a brushless 12mm motor and running my mamba 25 esc with it. also i will be making chassis sets similar to the pro-z but not for the 80 dollars:eek: im going to charge 50 for complete (upper and lower)... also for the people who are asking for upgraded motors may want to check out heli tail motors. they are 130 size. like this coreless --------> http://www.helihobby.com/commonImages/coreLessTail.jpg <--------- you can find that motor and many more here... http://helihobby.com/html/motors.html four pages worth. have fun!!!

[m18_racer]

also for ebayers here is a complete brushless system. 9 amp thunderbird esc with the motor im getting. for 60 dollars. check it out. http://cgi.ebay.com/FEIGAO-IPS-1208436L-BRUSHLESS-CASTLE-CREATIONS-ESC_W0QQitemZ280065602419QQihZ018QQcategoryZ2563QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem?hash=item28006 5602419

[alfred]

I see that you have been doing some homework on this man.....glad to see that buddy.:D

[m18_racer]

Just a little bit:rolleyes:

[Lucifuge]

Im really thinking of getting one of these to. After you get your set up dialed in could you post a video of it. I've never done brushless (because of the coust for brand of everything) But I may just consider it sence the car itself is so inexpensive.

chris

[m18_racer]

no problem. but the esc im going to be using unless i sell it will be my mamba 25 esc.

[jaejw1]

that motor is 12mm x 30mm i think the 12mm x 22mm would be a better fit

[m18_racer]

well im keeping the brushed motor and upgrading the esc. but ya the 22 x 12 is perfect...

[Lostinturn3]

the chassis is STILL out of stock!

[m18_racer]

im thinking about still making chassis out of what i have... i have the templates and tools. but if i do i will only be selling 4 or 5.

[m18_racer]

well i have one cut out :D but i still need to do the edges (final touches) and drill it.. i could take a pic if yall wanted :)

[alfred]

Sure man, take a pic and show us what you have so far..........

[little-dom]

yeah that coreless motorshould work but you need to find a 1mm pinion

here is the spec.
High Performance Coreless Micro DC 5-2.4 tail motor




For all dual motor micro helis
The coreless tail motor is incredibly efficient and will allow for both longer life of your tail system and higher output. For best performance use with the Wes Tech high frequency tail controller ( HH376 ). The DC 5-2
.4 is an unrivaled performance motor in its weight, size and output. When used with the proper controler and at nominal voltage the motor can easily operate at full capacity for over 1000 hours.


Width: 12mm
Length: 18.5 mm
Weight: 10g
Motor Shaft: 1mm
Max Power: 10W (10V / 1A )
Pinion: Use HH154 / HH155 / HH156