Micro Setups.

[MDM3]

Show your setups:)
Micro 1
All Stock chassis,motor,diffs.etc. (except for GPM rear shock)
Futaba PCKA AM Shrinked 122Rx,MC230CR ESC Rewired with 18 gauge. Deans 3pin. Direct solder to motor.
Hitec 81MG servo
Orion 6v 1100 NiMH pack.

[MDM3]

Micro 2 BMW

Ratzaz Full Racer Pan carbon fiber chassis
Rear: VCS Shock w/15wt oil.
Frt: GPM dampeners.
GPM alloy shock mount,upper bulkhead,universals,knuckles
Rear: Ball diff./Losi 3098 TB
Front: Stock diff. GH ball diff on way.
Orion Elite Mod motor 12,13,14 metal pinions.
Orion 7.2v 1100 NiMH pack.
LRP Quantum Reverse rewired. Deans 3 pin. Direct solder motor.
Hitec 85MG
JR XR3 FM shrinked 135 Rx.

[MDM3]

Here is a pic

[froggie]

Here is my 5 year old son's set up:

GPM Front Knuckles
GPM Front Bulkhead Brace
Hitec 81MG servo
Noval XXL FM rx
MC230CR ESC rewired with Parma 18 Guage & Deans Ultra Plugs
Simpro 280BB motor hardwired to esc
Powerline shocks in place of posts connecting upper and lower deck
Orion 7.2 Battery Pack
Lynx 3D with Spectra Module
Losi Thrusy Bearing
HPI Ball Diff (on the way from Tower - cost me just $20 w/shipping!)

Yeah he is a lucky kid, but I have the nicer E Maxx!

[tc rcr]

stock micro,futaba 2 pc radio,s 3003 servo,novak xxl,orion stock motor.on the way 6v pack,hpi mod motor,rear ball diff,hpi one way,front dogbones.

[HarshGuy]

Sedan Micro - Ratzas racer chassis, ratzas racer upper deck, ratzas replacement rear deck, GPM aluminum front knuckles, GPM front oneway, gpm aluminum front dogbones, airtronics 94145 servo, KO KR297FZ recvr., Nocak Atom ESC, GPM rear ball diff, GPM aluminum motor mount

GTP Micro - Ratzas racer pro pan chassis, ratzas racer upper deck, ratzas rear VCS deck, ratzas rear VCS shock, team homies aluminum front knuckles, GPM front oneway, tram homies aluminum front dogbones, hitec HS85MH+ servo, KO KR297FZ recvr., LRP sport ESC, GPM rear ball diff, Puma Enterprises 5 cell stick pack, Puma enterprises GTP Steering linkage

Here are some pics:

http://www.arroyoc.com/harshmicro.htm

[larrco9]

ARM Pan car chassis
Speed 300 motor
Trinity five cell pack
HS-81mg
Futaba R122JE AM Receiver
MC230CR Speed Control
Integy alloy front knuckles.
GH alloy Universals
HPI rear ball diff
VCS shock on the way with Ratzas mount
GH front ball diff on the way.
Foam rear tires in case I need extra grip (rarely use)
With the ARM chassis I have the Servo mount to the side.
I also have a 6-cell pack that I use for fun. To fast for racing thought you cant control it.


Larrco9

[Woody]

1st car:
All stock, HPI one way front, HPI ball diff, Novak XXL, LRP Quamtum Pro, Hitec hs85mg The most stable car I have.........

2nd car:
ARM pan chassis, GPM one way front, GPM ball diff, Orion Big Block, Novak XXL, LRP Quantum Sport, Hitechs81mg.
This car's front one way was dead after a day of racing, replacement HPI's are on the way...

3rd car:
IPD 001 Chassis, HPI one way front, HPI ball diff, Novak XXL, LRP Quamtum Pro, Hitec hs85mg This car is very low to the ground and has very fast turn in.

4th car:
Ratzas pan chassis, HPI one way front, HPI ball diff, Novak XXL, LRP Quamtum Pro, Hitec hs55 This car still has yet to be dialed in.

I race in 4, 5, and 6 cell classes. I'll post pics later this week.

[p2gee]

My setup:

ARM chassis
Speed 300
GM v6 ESC
Novak Mercury RX
Hitec 85MG servo
GPM Pro Oneway
GPM Alloy Front bulkhead
GPM Alloy steering knukles
GPM Alloy CV's

[runtracer]

stock chassis (cut)
stock motor
stock front diff
hpi rear ball diff
steel dogbones
futaba 230 esc
magnum sport tx
royavac AAs

pics at www.runtracers.com (mine's the green skyline)

[MDM3]

Nice work guys:) Keep them coming. It will make it easier when the old "How do I set up my car" question gets asked.

[armithius]

Stock Class Racer (Our stock class allows graphite)
-Cut Stock Chassis lowered .5mm
-IPD Graphite Upper Deck
-GPM Graphite Rear Deck
-GH Blue Spring in the rear and Red Spring up front
-HPI Stock Motor
-LRP Quantum Sport ESC
-Novak XXL Rx
-Hitec HS-81MG Servo
-Ofna 5 cell brick pack
-Futaba 3PJ FM Radio
-Stock Tires all around
-Widest wheel setting
-HPI Corvette C5-R Body
-Deans Connectors

[armithius]

Mod Class Racer
-IPD Chassis and Top Deck
-GPM Graphite Rear Deck with the 2 Oil Shock setup
-Chassis Lowered .5mm
-Team Homies Rear Ball Diff
-GH Front Oneway
-GPM Front Alloy Universals
-GPM Alloy Steering Plate (1 deg toe in)
-Dynamite Soft Rear Tires
-Stock Front Tires
-Soft Rear Spring
-Stock Front Spring
-Ofna 6 Cell Brick Pack
-LRP Quantum Sport ESC
-Switch Between Orion Elite Mod and HPI Mod
-Novak XXL RX
-Hitec HS-81MG Servo
-Futaba 3PJ Fm Radio
-Widest wheel settings
-HPI Corvette C5-R Body

[Gale Force]

ok, here I go,


Micro RS4 BMW M3
IPD Racing bottom/top carbon fiber chassi
IPD Racing rear upper chassis
Associated VCS with 15w oil and black spring
Team Orion Elite Mod with assortment of pinions
LRP Quantum Reverse ESC
Novak XXL fm
Hitec HS 81-mg steering servo
6-OFNA 1.2v 1000mah NiMH brick cells, wired in series = 7.2v
HPI Racing front one way
Jet Racing aluminum rims (for looks)
HPI Medium front tires
HPI soft rear tires
GPM soft tires
IPD Racing 1.5mm slam kit
IPD Racing stainless steel screw kit
HPI Racing white rims [for racing]
more stuff to come!


I'm sure I forgot some thing.

Coming soon,

IPD Racing MCFR-005 [updated chassis]
HPI rear ball diff
front shocks...[not sure what brand I want to run]
CVD's...[not sure what brand]
more as it becomes available


Check my site to see pics of my Micro http://galeforce.tripod.ca

Jay

[Kingtooshy]

Hey i got a new 12 cell setup "anyone remember my last one with a pack on top
now they are all on the bottomA:\MVC-751F.JPG

[KilRuf]

Here is my Micro. Dynamite soft tires, GPM Pro oneway, LRP Quantum Sport ESC, de-cased Airtronics receiver, Hitec HS-81MG, Big Block Motor, 6cell Ofna Brickpack. I thinks that's it for now.


-Jimmy Mac

[zaskar]

j

[CooLJoE]

Full stock micro with the following:

Futaba 2-channel receiver
GM V3R ESC
MIG 280 motor w/ 11t pinion (soon to be speed300 w/ 13t metal pinion)
Futaba FP-132H micro servo
Wide regular tires in rear (HPI)
Narrow regular tires in front (HPI)
Skyline body (150mm)

[p2gee]

Originally posted by KilRuf
Here is my Micro. Dynamite soft tires, GPM Pro oneway, LRP Quantum Sport ESC, de-cased Airtronics receiver, Hitec HS-81MG, Big Block Motor, 6cell Ofna Brickpack. I thinks that's it for now.


-Jimmy Mac


Pretty neat little car for a stock chassis.

[Raydee]

Here is my setup which changes every week!
Ratzas Racer pro chassis
Ratzas Rear deck
VCS shock
HPI mod motor
Orion 7.2 volt pack
Hitec HS81MG servo
Futaba Magnum JR FM radio and Receiver
Futaba MC230CR ESC
Dynamite soft tires
Corvette body

Not too many useless upgrades!

http://home.adelphia.net/~raydee/images/Ratzaschassis5.jpg

[TGRupert]

Originally posted by p2gee



Pretty neat little car for a stock chassis.

in thread http://yourmicro.nexcess.net/forums/showthread.php?s=&threadid=39 we were talking about wether it's worth it to upgrade the stock chassis. I'd like to hear why you think it's a worth while upgrade.

[Kingtooshy]

why not?

[john keifer jr.]

chassis-ratzas pro pan chassis
front-stock diff,cut springs-black,sway bar
rear-hpi ball diff,stock suspension
hitec 85mg servo
shrinkwraped futaba rec.
shrinkwrapped mc-230 sp. cont.
sanyo 6 cell 1100 nimh
hpi mod motor- 8t orion pinion
front tires-hpi stock, traction comp. added
rear tires- dynamite soft
corvette body

***this thing is dialed in on a 30'x50' carpet track
so far no one can touch me if i do my part

[Kingtooshy]

nice setup

[KilRuf]

Mine handles pretty damn good with that setup on carpet. Stock front tires with Dynamite soft Rears. Now I just need some soft front springs and hook up my front sway bar and I'm set. I think once/if I get beat bad, I'll try an upgraded chassis. Til then I'll save my money for motors for my XXX-S and various other hopups. My chassis isn't even cut yet! :D

Jimmy Mac

[TGRupert]

Originally posted by Kingtooshy
why not?

because it doesn't weigh any less, isn't stronger, and not all hop-ups work with all of the chassis'

[MDM3]

Are you guys running that sway bar mod that was in one of the car mags just recently. Is it worthwhile?

[bmwrs4]

RUNTRACER, how did you do your carbon fiber hood it looks so good!

[guamhpi]

Micro #1

-TO crf T chassis
-TO soft tires
-TO elite stock
-TO core modified
-TO alloy motor pod
-TO 9t steel pinion
-TO 7.2 pack
-TO blue front springs
-TO blue rear springs
-Futaba MC230CR
-Futaba 2PEKA
-HPI titanium antenna
-HPI ball diff
-powerline top cover

Micro #2

-All stock except TO elite stock

[freestyleracing]

Originally posted by p2gee
My setup:

ARM chassis
Speed 300
GM v6 ESC
Novak Mercury RX
Hitec 85MG servo
GPM Pro Oneway
GPM Alloy Front bulkhead
GPM Alloy steering knukles
GPM Alloy CV's


how come when i try to find things out about the track (schedule, etc.) it gives me errors...i live relatively close and am interested in going there to race

[MicroGTR]

i have,
TE chassis
1100 mah 7.2
LRP quantnum reverse
Novak spy (in the mail)
GPM knuckles
GPM dogbones
Futaba AM radio w/ stock reciver
hi-tec HS 81-mg

i think thats it,

soon to come
airtronics mx-3
tiny futaba reciver

[Chief]

MDM3???????????????? How does that STock micro you have run with the 5 cells. i want to put 6-7 on mine. is it fast? does it over heat at all? im getting suome 1800mah though
:D thanks

My set
Well just got it STOCK.

Futaba ESC: MC21OCB

JR Rec and Radio Python

NiMH: single cells pack : i want to get rid of 4 cells talk about SLOWWWWWWWW. i think 6-7 will be ALOT faster :D

[MMTM]

-ARM chassis
-Orion Flash esc
-Hobbico cs-35 micro servo
-HPI tie-rod link steering
-Elite Stock motor
-6v 1100 hpi pack
-JR 756 radio
-Mercedes CLK DTM body

I removed the upper deck and everything else is stock. It handles great as is but I may try slotting the chassis as others have described... Well, maybe when stop running so good. If it ain't broke, don't fix it.

[hdsport82]

Full Ratzas Pro chassis, VCS shock-30w black spring loose, stock shocks with firm springs, HPI ball diff rear and one way in front, Elite mod, Novak Spy ESC, TRC foams-magenta fronts and pink rear, Futaba 3Pj radio with micro receiver, HPI steering servo saver with Futaba S9602 servo, Rayovak AAA nimh 5 cell packs, GPM and Integy aluminun moter mount and front bulk head and lower a arm set, aluminum universals all purple, Team Orion pinion gears, HPI stratus body and rear mounted transponder. This setup usually gets me in the top five every week of over 20 other cars.