Crowd Pleazer body on RC18T?

[fuxemup]

Anyone have any success mounting this body on the RC18T? I can't seem to get the rear pegs lined up well enough to get pins through. The rear shock tower on the RC18T has the posts sunk down. And the Crowd Pleazer is flat in the back. Is there a way to add longer posts to the rear?

[Mondo]

Fuxemup

I have both, a ProLine Crowd Pleazer and an RC18T.
The Crowd Pleazer is mounted on a Mini-Quake, but I'm sure I can check it out regarding fitting myself.
I'll do this at home later tonight

[Big-Kid]

I saw someone with the crowd pleazer on their RC18. It was in the galleries at one18th.com .

The Losi and AE extended body mounts have worked. I used the AE "Rear Body Mounts Set", part #8874 which is listed as $3.50. That fit's nicely. There are already mounting holes for it. Just trim them if it's too long. You will need to use the bigger clips for the longer post's because they're made for the 10th scale cars. The set from AE does come with clips and everything else you need:cool:

[Mondo]

Fuxemup

Big-Kid is right, you will need the rear body mount set with the extended mounts.
The shock towers on the RC18T get in the way. Alternatively you could drill two larger holes in the CP bodyshell to allow the shock towers to protrude from.