GPM Mass Order

[kaymin]

title says it all, i was just wondering who is wanting to get these gpm parts and wants to put in an order with alot of other people so we get a discount.

I'm in, so theres 1. we need atleast 10 that want 18t parts for a discount.

if you want to order parts for other kits thats ok too.


we have 6 people so far, these are the prices I have right now,

ALLOY SERIES
AR003F/L ALLOY FRONT BUMPER (45MM WIDE) - 1PC $8.90
AR003R ALLOY REAR BUMPER WITH SCREWS - 1PC SET $6.50
AR010 ALLOY REAR BULKHEAD - 1PC $3.50
AR0126 ALLOY BATTERY HOLDER WITH FANNING DESIGN - 1PC $8.90
AR012F/R ALLOY FRONT/REAR GEAR BOX - 1PR
AR014T ALLOY MOTOR GEAR (14T) - 1PC
AR015T ALLOY MOTOR GEAR (15T) - 1PC
AR016T ALLOY MOTOR GEAR (16T) - 1PC
AR017T ALLOY MOTOR GEAR (17T) - 1PC
AR016A ALLOY CHASSIS GEAR COVER - 1PC $3.50
AR018 ALLOY MOTOR HEATSINK MOUNT - 1PC $6.50
AR019 ALLOY C-HUB - 1PR $8.90
AR021 ALLOY FRONT KNUCKLE ARM - 1PR $8.90
AR022 ALLOY REAR KNUCKLE ARM - 1PR $8.90
AR024 ALLOY SERVO MOUNT WITH HEATSINK - 1PC $4.50
AR025 ALLOY MAIN SHAFT - 1PC
AR028 ALLOY FRONT DAMPER PLATE WITH ALLOY COLLARS & SCREWS - 1PC SET $6.50
AR030 ALLOY REAR DAMPER PLATE WITH ALLOY COLLARS & SCREWS - 1PC SET $7.50
AR048 ALLOY STEERING ASSEMBLY - 3PCS SET $8.90
AR055 ALLOY FRONT LOWER ARM - 1PR $8.90
AR056 ALLOY REAR LOWER ARM - 1PR $8.90
AR2043 ALLOY FRONT/REAR DOG BONE (43MM) - 1PR $2.90
AR347F ALLOY FRONT ADJUSTABLE SPRING DAMPERS (47MM) WITH ALLOY COLLARS & SCREWS - 1PR SET $11.50
AR357R ALLOY REAR ADJUSTABLE SPRING DAMPERS (57MM) WITH ALLOY COLLARS & SCREWS - 1PR SET $11.50
LN3L(F) ALLOY FLANGED LOCK NUTS (3MM) - 4PCS SET
TLN3L(F) TITANIUM FLANGED LOCK NUTS (3MM) - 4PCS SET

DELRIN SERIES
DAR080 DELRIN FRONT/REAR BALL DIFFERENTIAL JOINT - 1PR $6.50

FIBRE SERIES
FAR016 FIBRE CHASSIS - 1SET

GRAPHITE SERIES
GAR016 GRAPHITE CHASSIS - 1SET

STEEL SERIES
SAR243C(ADB) STEEL HUBS+ALLOY DOG BONE UNIVERSAL SWING SHAFT - 1PR


TITANIUM SERIES
TAR004 TITANIUM KINGPINS USE FOR C-HUB - 4PCS $5.90
TAR014T TITANIUM MOTOR GEAR (14T) - 1PC
TAR015T TITANIUM MOTOR GEAR (15T) - 1PC
TAR016T TITANIUM MOTOR GEAR (16T) - 1PC
TAR017T TITANIUM MOTOR GEAR (17T) - 1PC
TAR025 TITANIUM MAIN SHAFT - 1PC
TAR039F/R TITANIUM FRONT/REAR DIFFERENTIAL JOINT - 1PR $5.90
TAR080 TITANIUM FRONT/REAR BALL DIFFERENTIAL JOINT - 1PR $12.50
TAR101 TITANIUM HINGE PINS - 4PRS SET $5.90
TAR160 TITANIUM COMPLETED TIE ROD SET - 3PRS SET $15.50
TAR2043 TITANIUM FRONT/REAR DOG BONE (43MM) - 1PR $5.90
TAR243C TITANIUM UNIVERSAL SWING SHAFT -1PR (CVD DESIGN)
TAR243C(ADB) TITANIUM HUBS+ALLOY DOG BONE UNIVERSAL SWING SHAFT - 1PR
TARFSS TITANIUM FULL SCREWS SET - 41PCS SET $12.90


this is directly from gpm! I just sent them an e-mail asking about how their shipping rates work out.

[BLiND]

dont forget you'll need to wait weeks/months for the parts to be ready, shipping will be about $100, and you can only pay with an international wire transfer which is $55 minimum at my bank

:)

[Mondo]

Good point BLiND, plus bear in mind, GPM parts will not be anywhere as near as good as Associated hop ups. As most Micro RS4 owners know from experience, GPM is mass produced, sub-standard stuff.

[BLiND]

thats true, personally I've used only associated parts on my RC10T3 factory team truck, and I foresee nothing different with the RC18T. But thats just me :)